Opening the top cover to the card printer -20, Opening the top cover to the card printer – FARGO electronic L000286 User Manual
Page 29
RESTRICTED USE ONLY
Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1)
2-20
Opening the Top Cover to the Card Printer
Step
Procedure
1
Open the Top Cover of the Printer by lifting up on its front edge and tilting the
cover back into its fully open position. See CardJet Engineering Drawing
R400019 in the appendix.
2
To close the Top Cover, gently lower the Top Cover until it clicks into place.
IMPORTANT! Before the Ink Cartridges can be loaded into the Printer, the Printer Driver
must be installed and the Printer's power and USB cables must be connected. Once this is
done, the Printer's Ink Cartridge Cradle will move to the center position whenever the Top
Cover is open. The Top Cover must be closed securely in order for the Printer to operate.