FARGO electronic L000286 - Manual (Page 37)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 2-28
Loading the Ink Cartridges
Prior to loading Ink Cartridges, the Ink LED light will flash to signal that Ink Cartridges must
be installed. Follow these steps to load both the color and black Ink Cartridges into the
Printer. See the
Interpreting the LED Lights procedure.
Step Procedure
1
Caution: Before Ink Cartridges can be loaded into the Printer, the
Printer Driver must be installed and the Printer's power and USB cables must be
connected. Once this is done, the Printer's Ink Cartridge Cradle will move to the
center position whenever the Top Cover is open.
Open the Top Cover by lifting up on the cover and tilting the cover back into its
fully open position. The Ink Cartridge Cradle will move to the center position.