FARGO electronic L000286 - Manual (Page 66)

RESTRICTED USE ONLY Fargo Electronics, Inc.
CardJet 410 Card Printer/Encoder and Persona CardJet C7 Printer User Guide (Rev. 6.1) 2-57
Technician Handbook for CardJet Card Printers (continued)
Term Description
Monitoring Card
Levels The Card Cartridge is transparent for visual card monitoring from side
or top view. The LED error light indicates the following:

Cards Out message: This provides a definitive Cards Out
message on the PC screen and a LED flash on the Printer.

Card Cartridge Replacement: This resumes without an error after
a Card Cartridge is replaced if the cards run out in the middle of a
batch print.
Normal Card
Printing (See
Printer Driver
preference
options) Select the normal Printer Driver preference options to print cards with
color reproduction matching the required color characteristics of a
sample image to within acceptable limits.
Optical Sensors The slotted Optical Sensor on the Card Path is located between the
Card Cartridge and the print area.
Output Hopper The portion of the Printer that accepts the completed cards. Close the
door if you want the card to stick neatly.
Pause, Slow
Print When the Printer data from the PC slows down or pauses for short
intervals, there is not adverse effect on the printed output. (Note:
When the print job and the Printer is initiated with normal conditions
and the Printer Top Cover is opened during the print process, the
Firmware will trap the condition and will put the Printer into a safe
pause mode.)
Continued on the next page