Fujitsu Siemens Computers BS2000/OSD - Manual (Page 12)

12 U25339-J-Z126-1-7600
Control panel on the Business Server cabinet Controls and indicators
4.1 Control panel on the Business Server cabinet
The control panel is connected with the service processor (SVP) in the S130 Business
Server.
The physical structure of the control panel is illustrated in the following diagram:
Figure 4: Control panel on the cabinet of the S130 Business Server
The function of the indicators and control elements on the control panel is described below.
4.1.1 Function of the indicators
STATUS
The STATUS indicator is an LCD display and can show alphanumeric characters. The
codes change when the Business Server and the IMPL are switched on. No P codes
should be displayed if POWER ON or IMPL has been run without errors (see next
page). If this is not the case, this indicates a malfunction and you should contact the
service department.
STATUS
LCD BACK LIGHT
POWER CONTROL
ALARM STOP
CANCEL/
POWER ON POWER OFF
POWER
COMPLETE SYSTEM CHECK
IMPL
9999 35