Fujitsu Siemens Computers BS2000/OSD - Manual (Page 19)

U25339-J-Z126-1-7600 19
Controls and indicators EMERGENCY STOP switch
4.3 EMERGENCY STOP switch
Not only the Business Server cabinet, but also the global storage and battery cabinets each
have an EMERGENCY STOP switch.
If the EMERGENCY STOP switch on the S130 is pressed, global storage is also switched
off. If you wish to cut power to the entire system, the EMERGENCY STOP switch on the
battery cabinet must also be pressed.
Figure 6: EMERGENCY STOP switch on the Business Server cabinet, global storage and battery unit
This switch should only be used in emergencies. It can only be reset by the service
department.
The system can only be switched back on after the switch has been reset.
The system data is not saved when the switch is pressed.
Use the EMERGENCY STOP switch as follows:
Ê Open the transparent switch cover and press the red switch downwards to the O
position.
S130 Business Server Global storage Battery unit
EMERGENCY STOP
I
o
!