Fujitsu Siemens Computers BS2000/OSD - Manual (Page 40)

40 U25339-J-Z126-1-7600
General frame structure Standard processing in SVP mode
6.2.2 System status messages in line 23
The following picture shows the extended area of the system status messages in line 23:
Figure 12: Format of the extended area of the status display in line 23
Meaning of the status messages in line 23:
Column Symbol Meaning
55 - 58 AUTO
SUSP
CLCM This display does not occur with BS2000 or VM2000.
60 - 61 none
M
MO
M@
D@
E@
X@
ARMSS-Teleservice not permitted.
ARMSS-Teleservice is possible.
An ARMSS connection to the SKP and ARMSS center is established or termi-
nated.
ARMSS is active.
ARMSS is in the remote operation state. The control is at the center.
ARMSS is in the remote operation state. The control is with the SKP and SVP.
ARMSS is possible, line connection is prevented.
63 - 64 none
CE
CM The system is in the user state.
The system is in the maintenance state.
The system is in the hot system maintenance state.
66 - 67 HD
FD Hard disk 2 is online.
A floppy disk is active in the FD drive.
70 - 74 none
TEST The system is not in the test state.
The system is in the test state.
1 2 3 4 5 6 7 8
.... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0 .... + .... 0
AUTO
SUSP
CLCM
MO
M@
D@
E@ CM
CE FD
HD TEST PW CHK
AUTO mode
ARMSS mode
Maintenance mode
Hard disk/floppy disk
Test mode
Power alarm
System check
X@