Fujitsu Siemens Computers BS2000/OSD - Manual (Page 53)

U25339-J-Z126-1-7600 53
Standard processing in SVP mode User frames
DETAIL-2 STATUS
In this position the current settings of the PROGRAM LOAD FRAME:
DETAIL-2 are displayed.
Check the settings. If they are correct, execute the IPL by pressing . If not, press the
key to correct the entries in PROGRAM LOAD FRAME: DETAIL-2.
Special key functions
Executes IPL
After selecting this function and pressing , the following prompt will appear
The IPL must not be executed during system operation! If this instruction is
is not heeded, BS2000 will be shut down abruptly!
Ê Press and then to execute the IPL, or and then to
cancel the procedure.
Switches to PROGRAM LOAD FRAME: BASIC (page 50)
Switches to the PROGRAM LOAD FRAME: DETAIL-2 (page 54) and stores the
parameters entered.
ENTER
P9
ENTER
ENTER
***********************************
* *
* ARE YOU SURE ? (ENTER Y OR N) N *
* *
***********************************
!
Y ENTER N ENTER
P3
P9