Fujitsu Siemens Computers BS2000/OSD - Manual (Page 51)

U25339-J-Z126-1-7600 51
Standard processing in SVP mode User frames
6.4.2.1 (LD) PROGRAM LOAD FRAME: DETAIL-1
Figure 17: PROGRAM LOAD FRAME: DETAIL-1 screen
By making entries in this screen and pressing the key you can control the execution
of an IPL.
LOAD FUNCTION =>
The following functions are executed after the corresponding number
has been entered:
1 START AUTO executes IPL: automatic startup
2 START FAST executes IPL: fast startup
3 START DIAL executes IPL: dialog startup
4 START not used
5 SYSTEM DUMP executes SLED
6 LOAD CLEAR clears main memory before IPL
7 LOAD NON CLEAR does not clear main memory before IPL
IPL DEVICE => By making an entry in this field you can specify from which device an
IPL is to be executed.
1 PRESET GROUP The first device address in this column is the device
from which an IPL is to be executed. The order and
number has been specified previously in (AU5)
AUXILIARY FRAME: LOAD PRESET-1.
----- PROGRAM LOAD FRAME: DETAIL-1 ----- E02L01F
-LOAD FUNCTION- -IPL DEVICE-
==> ==> 2
*1 START AUTO *1 PRESET GROUP ------------------+
*2 START FAST >*2 CURRENT GROUP --------+ |
*3 START DIAL *3 UNIT ADDRESS -+ + +
*4 START FDE0 FDE0 0214
*5 SYSTEM DUMP XXXX 00B0
*6 LOAD CLEAR -----+ XXXX XXXX
*7 LOAD NON CLEAR -+ XXXX XXXX
|
+MT CONTROL- --- DETAIL-2 STATUS ---
PARMS=> 1 ==> 1 VM MODE : EMOS.AVM/EX
>*1 NL EXA MODE : ENABLE
*2 SL IPL EXEC : ENABLE
*3 NL-REWIND
*4 SL-REWIND *ENTER EXECUTE
*PF3 GO TO BASIC FRAME
*PF9 GO TO DETAIL-2
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST
ENTER