Fujitsu Siemens Computers BS2000/OSD - Manual (Page 41)

U25339-J-Z126-1-7600 41
Standard processing in SVP mode General frame structure
6.2.3 Hardware status display in line 24
The following diagram shows the format of the hardware status display in line 24:
Figure 13: Format of the status display in lines 24 and 25
Meaning of the status information in line 24:
The FLAG code represents a message or error code which can be evaluated by service
department personnel. The display appears according to the severity of the FLAG code. As
a rule, the last is shown.
6.2.4 Status displays in line 25
Displays of the emulated terminal 9750 and their meaning:
74 - 75 none
PW The power supply is okay.
(Power Warning) An error has occurred in the power supply of the S130.
78 - 80 none
CHK No CHK (machine check).
A CHK occurred in S130.
Column Symbol Meaning
1 - 50 cccccccc Command input area
51 - 80 FFFFFFFF FFFFFFFF FLAG code
LTG Line activated
SAN Send request
DUE Data transfer
BEL Signal
TAST Keyboard connected
FEHL Invalid input
Column Symbol Meaning
LTG TAST
FLAG CODE = FFFFFFFF FFFFFFFF cccc ................................... cccc