Fujitsu Siemens Computers BS2000/OSD - Manual (Page 30)

30 U25339-J-Z126-1-7600
Time-driven switching on and off of the SKP and S130
5.4 Time-driven switching on and off of the SKP and S130
The SKP can switch itself and the S130 on and off at a certain time.
Definition of the time at which the SKP and the S130 are to be switched on/off, a
shutdown command, and the length of the wait time before the SKP and S130 are
switched off can be specified using the sysadm forms.
Ê Select the menu item “sinix_2000 - System Administration SINIX-2000“ on the
UNIX System V, Administration menu.
Ê Select the menu item “up_down - Startup/shutdown settings“ on the SINIX-2000
system administration menu.
You will find a detailed description of how to configure time-controlled startup/shutdown
in the section “up_down” of the “SINIX-2000 V7.0” manual.
In order to switch the S130 on or off from the SKP, you must have the optional on/off facility.
Furthermore, the S130 must be configured to switch on and off automatically as part of the
starting and shutting down procedure for the SKP.
The SKP switches the S130 on. After the IMPL, the BS2000 system is started by the
POWER ON IPL function of the SVP.
When the SKP and S130 are switched off, the shutdown command is sent to the system.
You must ensure that the system has completed all its task. BS2000 can terminate during
the wait period before the S130 is switched off. Once this wait period has expired, the S130
is switched off, the SINIX system is shut down, and the SKP is switched off.
V7