Fujitsu Siemens Computers BS2000/OSD - Manual (Page 69)

U25339-J-Z126-1-7600 69
Standard processing in SVP mode User frames
6.4.8.4 (AU4) AUXILIARY FRAME: P-OFF/IMPL
Figure 30: AUXILIARY FRAME: P-OFF/IMPL screen
By making an entry in this frame and pressing , you can switch the S130 off or re-
initialize it.
FUNCTION => The following functions are executed when the appropriate number is
entered:
1 POWER OFF switches S130 off, order: first devices connectec to
the PCI (Power Control Interface), then CPU (further
information on this can be found on page 15 and
page 22)
2 IMPL executes IMPL
After you have selected a function and pressed , the following prompt will
appear:
The IMPL or POWER OFF must not be executed during system operation!
If this instruction is not heeded, BS2000 will be terminated abruptly!
Ê Press and to switch off the system or to execute an IMPL, or
and to cancel the procedure.
----- AUXILIARY FRAME: P-OFF/IMPL ----- E02L01F
FUNCTION=>
*1 POWER OFF
*2 IMPL
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST
ENTER
ENTER
***********************************
* *
* ARE YOU SURE ? (ENTER Y OR N) N *
* *
***********************************
!
Y ENTER N
ENTER