Fujitsu Siemens Computers BS2000/OSD - Manual (Page 82)

82 U25339-J-Z126-1-7600
PROGRAM LOAD FRAME PRESET1 Standard processing in SVP mode
The AUXILIARY FRAME: LOAD PRESET1 screen is displayed:
Figure 40: AUXILIARY FRAME : LOAD PRESET1 screen
You can reach this screen directly from the MODE SELECTION FRAME by
entering the frame code
AU5 in the FUNCTION=> field or the command FR AU5 in
line 24 and pressing .
START MODE => Enter 1 for automatic start of the BS2000.
IPL DEVICE
PRESET GROUP A unit address from which the operating system is
loaded (IPL) must be entered in the input field for
PRESET GROUP . A maximum of three further
addresses can be entered.
Entry in our example:
0108 .
POWER ON IPL => Enter 1 for automatic IPL after POWER ON.
INITIAL FRAME => Enter 2 for a detailed display of the LOAD FRAME.
Catalog parameters
Ê Press the key.
The values entered are saved and thus made known to the SVP. These settings are
accessed for each IPL.
----- AUXILIARY FRAME: LOAD PRESET1 ----- E02L01F
-START MODE- -IPL DEVICE-
==> 1
*1 START AUTO 1 PRESET GROUP -----------------+
*2 START FAST 2 CURRENT GROUP --------+ |
>3 START DIAL 3 UNIT ADDRESS -+ + +
*4 START A108 A108 0108
XXXX XXXX
XXXX XXXX
XXXX XXXX
-POWER ON IPL-
==> 1
*1 ENABLE
>2 DISABLE
-INITIAL FRAME-
==> 2
*1 LOAD FRAME(BASIC) *PF12 CATALOG
>2 LOAD FRAME(DETAIL) *PF9 GO TO LOAD PRESET-2
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST
i
ENTER
P12