Fujitsu Siemens Computers BS2000/OSD - Manual (Page 84)

84 U25339-J-Z126-1-7600
IPL in PROGRAM LOAD FRAME: DETAIL-1 Standard processing in SVP mode
Catalog parameters
Ê Press the key.
The values entered are saved and thus made known to the SVP. These settings are
accessed for each IPL.
6.5.5 Executing IPL in PROGRAM LOAD FRAME: DETAIL-1
The IPL can be executed manually 1according to the setting using PROGRAM LOAD
FRAME DETAIL-1.
The following are specified in the example below:
● loading VM2000
● dialog startup
● IPL device is specified manually by the entry of the unit address
(here: loading the BS2000 from a device with the unit address A108)
Conditions
You must be in the AUXILIARY FRAME: LOAD PRESET2 screen.
Invoking the PROGRAM LOAD FRAME: DETAIL-1 screen
Ê Press the key to return to the MODE SELECTION FRAME.
Ê Enter the frame code LD and press .
Or enter the FR LD command in line 24 and press .
After entering LD or FR LD in the MODE SELECTION FRAME, either the
PROGRAM LOAD FRAME: DETAIL-1 or the PROGRAM LOAD FRAME:
BASIC screen is displayed, depending on the INITIAL FRAME setting in the
AUXILIARY FRAME: LOAD PRESET1 screen (see page 82).
P12
F3
ENTER
ENTER
i