Fujitsu Siemens Computers BS2000/OSD - Manual (Page 26)

26 U25339-J-Z126-1-7600
Switching the S130 on and off from the SKP
The “Switching on / off the host” form is displayed:
Information on operation of the FMLI interfaces can be found in the “SINIX-2000
V7.0” manual [1].
By entering YES for one of the two questions at the bottom of the form followed by the
( CHOICES ) key, you can specify whether the S130 can be switched on or off immedi-
ately. Press the ( SAVE ) key after filling out the form.
On no account should both questions be answered with YES. If a direct switching action
is initiated by the reply YES, another message appears, which should again be
confirmed with YES:
V7
P2
P3