Fujitsu Siemens Computers BS2000/OSD - Manual (Page 39)

U25339-J-Z126-1-7600 39
Standard processing in SVP mode General frame structure
46 - 55 SYS-DOWN
CL-STOP
CHK-STOP
COMP-STOP
STOP
PSW-LOOP
WAIT
RUN
LOAD
The system may be in the system down state. This display can also
appear when Write-Console messages are output (e.g.
SHUTDOWN
COMPLETED) and can be deleted with the key.
In multiple-cluster operation, the selected cluster is in the stop state.
The selected CPU is in the CHECK stop state.
The address comparison stop mode is active and the selected CPU is
in the address comparison stop state.
The selected CPU is in the stop state.
An address loop was determined in the system.
The selected CPU is in the wait state.
The selected CPU is in the run state.
An IPL is executed via the selected CPU.
58 -72 none
PSW = The system is in the run state.
The system is in the stop state on the PSW address
(PSW=Program Status Word).
Column Symbol Meaning
F3