Fujitsu Siemens Computers BS2000/OSD - Manual (Page 80)

80 U25339-J-Z126-1-7600
Activating IORSF Standard processing in SVP mode
6.5.2 Activating IORSF
The set IORSF must be activated with a IMPL:
Conditions
You must be in the AUXILIARY FRAME: IORSF CONTROL screen.
Ê Press to switch back to the AUXILIARY FRAME: MENU.
Ê Enter 4 in the SELECTION=> field. Press .
The AUXILIARY FRAME: P-OFF/IMPL screen is displayed:
Figure 39: AUXILIARY FRAME : P-OFF/IMPL screen
Ê Enter 2 in the FUNCTION=> field to execute an IMPL. Then press .
The following prompt appears:
The IMPL must not be executed during system operation!
Ê Press to execute the IMPL or , to cancel the procedure. Confirm your entry with
.
P3
ENTER
----- AUXILIARY FRAME: P-OFF/IMPL ----- E02L01F
FUNCTION=>
*1 POWER OFF
*2 IMPL
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST
ENTER
***********************************
* *
* ARE YOU SURE ? (ENTER Y OR N) N *
* *
***********************************
!
Y N
ENTER