Fujitsu Siemens Computers BS2000/OSD - Manual (Page 79)

U25339-J-Z126-1-7600 79
Standard processing in SVP mode Selecting IORSF
The AUXILIARY FRAME: IORSF CONTROL screen is displayed:
Figure 38: AUXILIARY FRAME: IORSF CONTROL screen
The first four IORSF are displayed in the upper portion of the screen. You can switch to
the next four with the
key, and back with the key.
In this example the IORSF with the number 3 is active.
Display: CURRENT NO. = 3
Now you want to activate the IORSF with the number 2:
Ê Enter 1 in the FUNCTION=> field. Press .
Ê Enter 2 in the NEXT POWER ON RESET NO.=> field and press .
----- AUXILIARY FRAME: IORSF CONTROL ----- E02L01F
NO. COMMENT
0 S130TA1 // \UGENDATA.HW.S130.TA1.OSD.S130TA1 / 07.05.97
DATE 1997.04.30 TIME 16:00
1 S130TA1X // \UGENDATA.HW.S130.TA1.OSD.S130TA1X / 07.05.97
DATE 1997.04.30 TIME 16:07
P 2 S130TA1 // \UGENDATA.HW.S130.TA1.OSD.S130TA1 / 20.05.97
DATE 1997.05.14 TIME 15:20
P 3 S130TA1X // \UGENDATA.HW.S130.TA1.OSD.S130TA1X / 20.05.97
DATE 1997.05.14 TIME 15:43
FUNCTION=> CURRENT NO. = 3
*1 SET NO NEXT POWER ON RESET NO. => 3
*2 PROTECT SPECIFY P(PROTECT) OR U(UNPROTECT)
*3 SWAP SPECIFY SWAP NO. <=>
*PF8 NEXT PAGE
CL-0 CPU-0 CHP-0 RUN
M
FLAG CODE = F6C0C100 00000F00
LTG TAST
P8 P7
ENTER
ENTER