Fujitsu Siemens Computers BS2000/OSD - Manual (Page 23)

U25339-J-Z126-1-7600 23
Switching the S130 on and off from the SKP
c) You can also terminate the SINIX system using the on/off button on the SKP. However,
please make note of the following:
If the SKP is switched off using the button, it sends the command /shutdown or a
self-defined /run xxxx command to any running BS2000 system before it switches
itself off after a certain wait time has expired.
You can define the shutdown command and the length of the wait period using the
sysadm forms.
Ê Select the menu item “sinix_2000 - System Administration SINIX-2000“ on the
UNIX System V, Administration menu.
Ê Select the menu item “up_down - Startup/shutdown settings“ on the SINIX-2000
system administration menu.
You will find a detailed description of how to configure time-controlled startup/shutdown
in the section “up_down” of the “SINIX-2000 V7.0” manual.
5.2 Switching the S130 on and off from the SKP
To switch the S130 on and off from the SKP, it must have the optional on/off facility.
The on/off facility is linked to the SKP via the COM2 V.24 interface.
!
V7
V.24
Channel type 2
On/off facility
SKP
LAN
Console
S130
SVP
LAN
COM2