GCC Printers Elite XL - Manual (Page 15)

Setting up the Elite XL 1-1
Unpacking the printer
In addition to the printer, the Elite XL box contains the following items:
IMPORTANT: Save all packing materials and shipping boxes in case you ever
need to transport the printer and toner cartridge.
In addition to the contents of the Elite XL box, you will need the appropriate
cables to connect your computer to the printer. The Elite XL offers LocalTalk,
serial (RS-422), and Centronics (parallel) interfaces as standard. Ethernet is
also standard on all Elite XL models.
To unpack the Elite XL:
1. Remove the Universal paper tray and the software and documen-
tation package from the shipping box.
2. Remove the two pieces of packing foam from the top of the
printer.
3. Lift the printer out of the box and place it on a flat surface.
4. Remove the plastic bag surrounding the printer.
5. Remove the plastic and cardboard surrounding the universal
paper tray.
GCC TECHNOLOGIES
Elite ™ XL 808
Configuration Page
Printer Information
Interfaces
Paper Handling
Language: English
AppleTalk Name: Model
Page Count: 20
RAM Installed: 8MB
Hard disk: No disk
OS Version: 2.3
PostScript Level 2 Version: 2.3
ROM Version: 2.3
H/W Version: 1.0
AccuGray: Enabled Print Darkness: Normal
Default Source: Upper Tray
Default Size: Letter
Jam Recovery: Disabled
Paper Reserve: Enabled
Manual Feed Timeoutt: 5 Minutes
8-pin Serial: LocalTalk RS422 Serial (Inactive) Baude Rate: 9600
Data Bits: 8
Stop Bits: 1
Parity: None
Flow Control: Xon/Xoff
RS232 Serial (Active) Baude Rate: 9600
Data Bits: 8
Stop Bits: 1
Parity: None
Flow Control: Xon/Xoff
Parallel Port (Active)
PS/PCL Sensing: PostScript Only Port Emulation Parallel Port: Auto Switch
RS232 Port: Auto Switch
RS422 Port: Auto Switch
LocalTalk Port: PostScript Only
PostScript Default Resolution: 800
Job Cancel: Enabled
Start Page: Disabled
Wait Timeout: 300 Seconds
PCL Resolution: 600
Copies: 1
Font Source: Internal
Font Number: 1
Pitch: 10.0
Point Size: 12.0
Orientation: Portrait
Page Length: 60
Symbol Set: Roman-8
Wait Timeout: 120 Seconds
Line Wrap: Disabled
Line Termination: Normal
Emulations
1) Set Cleaning Paper with its face down in a cassette.
2) Start print.
C l e a n i n g P a p e r
User’s manual
Multipurpose feeder
extension
Universal
paper tray
Configuration page
AC power cord Toner cartridge
(in box)
Cleaning
page
Elite XL CD-ROM
GCC T ECHNOLOGIES
Elite XL GCC TECHNOL OGIES
User’s Manual
Elite XL
Bitstream fonts
Chapter
1
Setting up the Elite XL