GCC Printers Elite XL - Manual (Page 172)

Paper specifications and recommendations B-1
GCC Technologies recommends the following materials for use with the Elite
XL. GCC does not assume liability for materials used with the Elite XL
that are not listed below.
Printing on standard papers
The Elite XL prints on most kinds of paper stock, including most color stocks
and letterhead. The printer produces best results on standard 20-pound (75 g/
m
2 ) copier-type paper; however, paper weights from 16-lb. to 28-lb. (60 g/m 2 to
105 g/m 2 ) should also provide good results.
To produce even clearer, sharper images, use paper with a surface that is
smoother, but not shinier, than photocopy paper. Some companies offer paper
specifically designed for laser printers.
Printing on letterhead
Letterhead should conform to the weight and surface characteristics specified in the
previous section. Also, keep the following points in mind when printing on
letterhead:
• Temperature: Some letterheads use low-temperature dyes that vaporize
and smear at high temperatures. Many letterheads that
have a slick texture use a heat bonding process called
thermography that bonds the print to the paper. Letter
heads produced with this technique may “unbond” in the
Elite XL, causing damage to the printer.
• Paper Texture: Highly textured paper may not print evenly.
• Paper Finish: Paper that is extremely shiny does not work well.
Printing on envelopes
Use envelopes that are smooth (but not slick) and have rectangular or square
flaps (rather than a triangular flap).
Appendix
B
Paper specifications
and recommendations