I nstalling or replacing a toner cartridge, Setting up the elite xl 1-5, Protective flap, do not lift – GCC Printers Elite XL User Manual

Page 19

Advertising
background image

Setting up the Elite XL 1-5

3.

If you are replacing a cartridge, remove the empty cartridge and
discard it.

Grasp the yellow handle on each end of the toner cartridge and pull the
cartridge straight out.

4.

Remove the protective sheet from the toner cartridge.

The toner cartridge is shipped with a protective paper sheet inserted
between its rollers. Remove the sheet by pulling it downwards. Do not
remove the sheet by pulling it upwards. This will lift the protective
flap, allowing light into the cartridge which could cause damage to the
photosensitive drum.

Before inserting

the toner cartridge

in the printer

,

detach the tape

and pull this sheet

out in the direction

indicated.

NOTICE

Bevor Sie die

tonerkartusche in

den Drucker

einsetzen, lösen

Sie das Band und

ziehen das Blatt in

die angegebene

Richtung heraus.

ACHTUNG

Décoller le ruban

et retirer cette

feuille dans la

direction indiquée

avant d’insérter la

cartouche toner

dans l’imprimante.

AVER

TISSEMENT

Installing or replacing a toner cartridge

Protective flap, do not lift

Advertising