GCC Printers Elite XL - Manual (Page 180)

Upgrading the printer’s memory C-7
still not displayed correctly, contact GCC Technical Support at (617) 276-8620.
Updating LaserWriter 8 printer driver
After the SIMM(s) are installed, the Macintosh printing software needs to be
updated, by updating the LaserWriter 8 driver configuration, so that the
additional memory is recognized by the printer driver.
To update the driver configuration:
1. Switch on the Elite XL.
2. Choose the Chooser from the Apple ( ) menu.
3. Click the LaserWriter 8 icon in the upper-left area of the Chooser.
The name Elite XL appears in the upper-right area of the Chooser below
“Select a PostScript Printer.” The name should appear highlighted; click
the printer’s name if it is not highlighted.
4. Click Setup….
The Setup dialog box appears.
5. Click Auto Setup .
A message box appears, informing you that the Macintosh is communicat-
ing with the Elite XL.
The LaserWriter 8 driver is automatically configured to use the newly
installed memory.
Note: If you have set the Paper Sizes menu in the Configure dialog box to either U.S.
Only or International Only, you will need to reselect the option because the Auto
Setup function resets this menu to the default – U.S. and International. See page 3-7
for information about the Paper Sizes configuration option.
Updating the LaserWriter 8 printer driver