GCC Printers Elite XL - Manual (Page 65)

Using the Elite XL with a Macintosh 3-11
Selecting Print options (LaserWriter 8)
Selecting:
Auto Select causes paper to be drawn from the tray (in the case of
multiple trays) that contains the paper size selected in the Paper option
of the Page Setup dialog box. If no optional trays are installed, Auto
Select has no effect and paper will be drawn from the internal tray.
Tray 1 causes paper to be drawn from the tray that is currently
inserted in the Elite XL’s main housing.
Tray 2 or Tray 3 causes paper to be drawn from the selected tray if
the corresponding optional sheet feeder is installed. If the selected
tray/sheet feeder is installed and the option is dimmed, see Appendix
D “Configuring optional sheet feeders.”
MPFeeder causes paper to be drawn from the multipurpose feeder.
Manual Feed allows you to bypass the normal paper sources of the
printer so that you may place a single sheet of special paper or other
media (e.g., transparency film) into the multipurpose feeder for
printing (see page 3-24 for more information about manual feed
printing).
Destination
The Destination option allows you to send your document to the printer or save
it to a file. See “Saving print files” on page 3-14.