GCC Printers Elite XL - Manual (Page 30)

Setting up the Elite XL Chapter 1
1-16 Chapter 1
Opening the paper output tray
After pages are printed, they are deposited into the output tray on top of the
printer. The Elite XL paper output tray can efficiently handle paper sizes up to
12 inches long. For longer paper the tray can be extended.
The output tray extension used on the 8ppm Elite XL printers differs slightly
from the one used on 16ppm printers:
• 8ppm – The output tray has two folding extensions.
• 16ppm – The output tray has one two-position extension.
To open the output tray extensions:
1. Open the first output tray extension.
16ppm printers – Grasp the back edge of the
output tray extension and pull it outwards to the first
position, marked B4 on the left-edge. You will feel a
slight “bump” as the retaining tabs on the underside
of the tray pass over the edge of the printer’s
housing. The tabs keep the extension tray from
slipping backwards.
In this position, the output tray can efficiently
handle paper sizes up to 15.5 inches long.
8ppm printers – Press down on the back edge of
the extension. This will cause the front edge of the
extension to flip upwards allowing you rotate it to
its fully open position.
In this position, the output tray can efficiently
handle paper sizes up to 15.5 inches long.