GCC Printers Elite XL - Manual (Page 32)

Setting up the Elite XL Chapter 1
1-18 Chapter 1
Connecting power to the Elite XL
The printer must be plugged into a grounded AC outlet (15 Amp) using the
power cord provided with the printer. Plug the power cord into the socket
located on the back of the printer then plug the cord into the wall outlet.
Switch on the printer using the OFF/ON switch located on the left side of
the printer. Do not defeat the safety of the three-prong plug. A defective
three-prong plug presents a serious shock hazard. If your outlet is not a
grounding-type AC outlet, have a licensed electrician replace the socket.
Electrical equipment may be hazardous if misused. Be careful when
plugging and unplugging the printer.