GCC Printers Elite XL - Manual (Page 16)

Setting up the Elite XL Chapter 1
1-2 Chapter 1
Printer Information
Configuration Page
G CC
T ECHNOLOGIES
For more information or the dealer nearest you, contact:
UNITED STATES 209 Burlington Road, Bedford, MA 01730-9143, U.S.A., Tel: (617) 275-5800, Fax: (617) 275-1115
UNITED KINGDOM Unit #3, Maple Grove Business Centre, Lawrence Road, Hounslow, Middlesex, England TW4 6DR,
Tel: (44) 81-569-4030, Fax: (44) 81-577-5072
GERMANY Vertriesburo Deutschland, Hahnbuschweg 2-4, 24147 Klausdorf, Germany,
Tel. Sales: 0431-79-97-610+611, Technical Support: (49) 79 97 620 + 621, Fax: (49) 0431 79 97 666
The GCC Technologies logo is a registered trademark of GCC Technologies, Inc. Elite is a trademark of GCC Technologies, Inc.
PhoenixPage and the PhoenixPage logo are trademarks of Phoenix Technologies Ltd. registered in the U.S.A.
LocalTalk is a registered trademark of Apple Computer, Incorporated. PCL is a registered trademark of Hewlett-Packard Company.
Elite ™ XL808
Language: English
AppleTalk Name: Elite XL
Page Count: 20
RAM Installed: 12MB
Hard Disk: No disk
OS Version: 2.3
PostScript Level 2 Version: 2.3
ROM Version: 2.3
H/W Version: 1.0
Serial Number: 45200059BHN Default Source: Tray 1
Paper Group: U.S.
Default Size: Letter
Jam Recovery: Disabled
Paper Reserve: Enabled
MPFeeder Orientation: Long-Edge Feed
Paper Thickness: Normal
Manual Feed Timeout: 300 Seconds
Energy Save: 15 Minutes
Paper Handling
8-pin Serial: LocalTalk
RS422 Serial (Inactive)
Baud Rate: 9600
Data Bits: 8
Stop Bits: 1
Parity: None
Flow Control: Xon/Xoff
Parallel Port (Active)
GCIO Card (Active)
Card Installed: GCIO Enet 1.0
Ethernet Address: 00:C0:B0:02:09:6B
Interfaces
PS/PCL Sensing: PostScript Only
Port Emulation
Parallel Port: Auto Switch
RS422 Port: Auto Switch
LocalTalk Port: Auto Switch
EtherTalk Port: Auto Switch
PostScript
Default Resolution: 800
AccuGray: Disabled
Job Cancel: Enabled
Start Page: Disabled
Wait Timeout: 120 Seconds
PCL
Resolution: 300
Copies: 1
Font Source: Internal
Font Number: 1
Pitch: 10.0
Point Size: 12.0
Orientation: Portrait
Page Length: 60
Symbol Set: Roman-8
Wait Timeout: 120 Seconds
Line Wrap: Disabled
Line Termination: Normal
Emulations
The model number of your
printer will appear here.
The Elite XL Configuration Page
Each Elite XL package includes a Configuration Page. It was printed on your printer,
at GCC’s manufacturing facility, prior to shipment. The configuration page displays
the software and hardware versions of the printer, factory default settings, and the
hardware configuration of your Elite XL. The page shown below is a facsimile, it
does not represent a configuration page for a specific Elite XL model. However, most
of the items shown will be on your Configuration Page.