GCC Printers Elite XL - Manual (Page 17)

Setting up the Elite XL 1-3
Choosing a location for the printer
Place the Elite XL on a flat, level surface in a well-ventilated area away from
direct sunlight and areas where the air temperature and humidity can vary. Do
not place objects on top of the printer. Do not obstruct the fan vent located on
the right side of the printer. Keep the printer away from areas where ammonia
fumes and excessive dust are present, and do not use ammonia-based cleaners
near the printer.
Place the printer with enough space (at least 12.5 inches) in front of it to allow
for the extension of the multipurpose feeder.
On Line Comm Paper Service
On Line
Menu
Manual Feed Form Feed Continue
Enter
Cancel
Reset
Elite XL
GCC TECHNOLOGIES
230mm
(9 inches)
180mm
(7 inches)
50mm
(2 inches)
320mm
(12.5 inches)
200mm (8 inches)
minimum overhead
clearance.
Choosing a location for the printer