GCC Printers Elite XL - Manual (Page 46)

Chapter 2 The Elite XL front panel
2-4 Chapter 2
• To reset all menus and submenus to the factory settings.
Press the On Line key to set the printer off line and then hold
down the Reset key for five seconds.
• To reset an individual menu or submenu(s) to the factory settings.
Cycle through the menu system to the submenu or individual submenu
setting that you wish to reset and hold down the Cancel/Reset key for
five seconds.
Note: Anytime you are cancelling more than one setting, a message will appear
prompting you to press Cancel or Enter; press the Cancel/Reset key to cancel the
reset operation or press the Enter key to continue the reset operation.
Menu key
The Menu key enables access to the Elite XL menu system. To access the
menu system, the printer must be off line. To take the printer off line, press
the On Line key.
The menu system is organized into a series of main menus and submenus
which contain option settings for configuring various printer functions or
information about current settings.
To navigate the front panel menu system:
Press the Menu key to cycle through the nine main menus.
If a main menu has submenus, “Press Enter…” appears in the display
window. Press the Enter key to access the submenus, and then press the
Menu key repeatedly to cycle through the submenus.
Press the On Line key at any time to exit the menu system and place the
printer on line.
See “The Elite XL menu system” starting on page 2-5 for a functional
description of each menu and submenu.
Enter key
The Enter key has three functions:
• Accessing submenus.
“Press Enter…” appears in the display window to prompt you to press
the Enter key to access a submenu(s).
• Saving changes to a main menu or submenu settings.
After making a change to a main menu setting or submenu setting,
press the Enter key to save the new setting. An asterisk (
*
) will
appear in the display window to the right of the setting to verify the
selection.