Selecting print options (elite xl driver) – GCC Printers Elite XL User Manual

Page 77

Advertising
background image

Using the Elite XL with a Macintosh 3-23

3.

Choose Remaining (the default) from the pop-up menu below First to
print all subsequent pages from the second paper source. (

Note:

When

Remaining is chosen the third line is dimmed.)

Select a paper source from the corresponding pop-up menu.

If you want to use a third paper source:

Choose Next from the pop-up menu on the second line.

Choose Remaining from the pop-up menu on the third line, to

print all subsequent pages from the third paper source.

Enter the number of pages you want printed from the second and
third paper sources and select a paper source from the corresponding
pop-up menu.

Note:

Tray 2 and Tray 3 appear as options in the paper source pop-up menus; however,

if the sheet feeder/tray corresponding to these options is not attached to the printer,
selecting it will have no effect.

The Repeat function

The Repeat function enables the custom paper source order you have selected
to be set up as loop. Click the box labeled Repeat if you want the paper source
order to repeat. In order to use the repeat function, Next must be chosen in
either one or both of the pop-up menus on the right, depending on the number
of sources (two or three) being used.

Selecting Print options (Elite XL driver)

Advertising