GCC Printers Elite XL - Manual (Page 28)

Setting up the Elite XL Chapter 1
1-14 Chapter 1
Insert letterhead face down with the top edge entering the printer first,
for short edge feed; for long edge feed, the top of the page should face
left. Insert envelopes (use short edge feed) with the flap up and the top
edge on the left as you face the front of the printer.
GCC TECHNOLOGIES
Elite
XL
608
Installing the multipurpose feeder extension plate
The Elite XL comes with an extension plate for the multipurpose feeder.
The extension plate should be used if you plan to output multiple sheets of
Legal, Tabloid, A3, or B4 size paper.
To install the multipurpose feeder extension:
1. Open the multipurpose feeder.
Refer to the illustration on page 1-12.
2. Pull out the multipurpose feeder tray extension.
Refer to the illustration on page 1-13.
3. Examine the extension plate.
The extension plate slides into the multipurpose feeder tray extension
and is held in place at two points: the hook (A), protruding from the
bottom of the extension plate, slips under the multipurpose feeder tray
extension, and a small tab (B) slips into the slot and under the main
section of the multipurpose feeder.