GCC Printers Elite XL - Manual (Page 49)

The Elite XL front panel 2-7
The Elite XL menu system
5. Paper Handling — Press the Enter key to access the 8 paper handling submenus
Submenu Description Settings Notes
Default
Source Determines from which tray
paper is drawn if the print job
does not specify a paper tray. Tray 1 , Tray 2, Tray 3,
MPFeeder (multipurpose
feeder), and Manual
Feed.
Paper Group Determines the page
sizes/orientations that the
Universal Tabloid/A3 paper tray
can handle. U.S. and International.
(220 volt printers ship set
to International.) See page 1-11 for Paper Group
specifications.
Default Size Determines the “expected” paper
size to print whenever a print job
does not specify a paper size. Letter , Legal, Legal 13˝,
Tabloid, Statement,
Executive, A3,
A4, A5, JIS B4, JIS B5,
Postcard, Comm. #10
env., Monarch env., DL
env., C5 env., If U.S. Paper Group is selected
and the Default Source is Tray 1,
2, or 3, then A5 and JIS B5 will
not appear. If International Paper
Group is selected and Default
Source is Tray 1, 2, or 3, then
Statement and Executive will not
appear.
Jam Recovery Determines how the printer
handles a paper jam. Disabled and Enabled. The printing process is somewhat
faster when Jam Recovery is set to
Disabled.
Paper Reserve Determines whether the printer
will draw paper from another
paper tray if the selected paper
tray is empty or has the wrong
size paper. (The reserve paper tray
must contain the same size paper.) Enabled and Disabled. If enabled, the Elite XL prints
from another paper tray when the
paper tray specified by the print
job is empty or has the wrong size
paper. If Disabled is selected, the
printer displays a message to
load a paper tray.
MPFeeder
Orient Set the expected paper orientation
for the multipurpose feeder. Long-edge feed and
Short-edge feed. This submenu applies to paper
sizes that can be loaded into the
multipurpose feeder in either
orientation. (See page 1-12.)
Paper
Thickness Improves print quality when
printing on heavy paper. Normal and Thick. Set the submenu to Thick when
printing on stock heavier than
normal letter weight.
The printer automatically uses the
Thick setting when printing from
an envelope tray or if postcards or
envelopes are printed from the
multipurpose feeder.
Manual Feed
Timeout Determines how long the printer
will maintain a manual feed
request Range from 30-600
seconds, in 30-second
increments and Never
Timeout. The default is
300 seconds (5 minutes).