GCC Printers Elite XL - Manual (Page 51)

The Elite XL front panel 2-9
The Elite XL menu system
6. Emulations (continued)
Submenu Description Settings Notes
PostScript
(6 submenus) PostScript submenus only appear when
the PS/PCL Sensing option is set to
Auto Switch or PostScript Only.
Default
Resolution Use to set the default PostScript output
resolution (dots per inch) Resolution options depend
on Elite XL model in use. Upgrades are available to increase
resolution. Contact GCC for details.
Default is the highest resolution available
with the Elite XL model in use.
Default
Screens Use to select a halftone line/screen
frequency (in lines per inch) for a
document whose creating application
does not provide this option. (All screens
at 45
0 , angle cannot be changed.)
300 dpi – 53 lpi
400 dpi – 71 lpi
600 dpi – 85 lpi
800 dpi – 94 lpi
1200 dpi – 106 lpi Settings at left show line screen defaults
for each Elite XL supported resolution.
Each resolution supports a different range
of line). Resolutions displayed depend on
the Elite XL model in use.
AccuGray Improves the look of halftones,
especially those printed at higher line
frequencies. Enabled and Disabled AccuGray may not work with all
applications. Documents may print more
slowly. AccuGray is not available with
all Elite XL models.
Job
Cancel Determines whether the Cancel/Reset key
is able to cancel the printing process. Enabled and Disabled
Start
Page Determines if the Elite XL start page will
print each time the printer is switched on. Enabled and Disabled The Start Page does not print if the
PS/PCL Sensing is set to PCL Only.
Wait
Timeout Sets the amount of time the printer waits
for character input after using all the
input previously sent to the printer. If the
printer does not receive character input
within the specified amount of time, the
job is automatically terminated. Range from 45 seconds to
120 seconds (in 15-second
increments) and Never
timeout Some applications may change this
setting during printing. In some cases the
change will be permanent and the new
timeout setting will appear in the
display. (You may reset it or, if the
application is one you use frequently,
leave the new setting.)
PCL
(12 submenus) The PCL menu (and submenu) will only
appear when the PS/PCL Sensing option
is set to Auto Switch or PCL only.
Resolution Use to set the PCL output resolution
(dots per inch).
300 and 600
Copies Use to set the default number of copies. Range from 1 – 99
Font
Source Determines from which default location
fonts will print from: either the PCL
resident fonts or additional fonts
downloaded to the printer’s RAM. Internal and Downloaded Downloaded does not appear if there are
no fonts loaded into the printer’s RAM.