Icom IC-7000 - Manual (Page 108)

99
7
VOICE RECORDER FUNCTIONS
Memory channels can be tagged with alphanumeric
names of up to 5 characters each.
Capital letters, small letters, numerals, some symbols
(! # $ % & ¥ ? " ' ` ^ + –
✱ / . , : ; = < > ( ) [ ] { } | _
_
@)
and spaces can be used. (See the step
t below.)
qRecord a message as described at previous page.
wCall up the voice memory recording mode as de-
scribed in steps q to e (see the instructions for
recording at previous page).
ePush [F-1 ≤] or [F-2 ≥] to select the desired voice
memory.
rPush [F-4 NAM] to enter memory name edit condi-
tion.
• A cursor appears and blinks.
• Memory channel names of no-recorded channels
cannnot be selected.
tPush [Y(
MENU / GRP
)] several times to select the de-
sired character group.
• [ABC], [abc], [123] or [etc] indicates the capital letters,
small letters, numerals or symbols, respectively
yInput the desired character by rotating [DIAL].
• Push [F-1 Å] or [F-2 Ç] for cursor movement.
• Push [F-3 DEL] to delete the selected character.
• Push [F-4 SPC] to input a space.
• Pushing the HM-151’s keypad, [0]–[9], can also enter
numerals.
uPush [Z(
MENU / GRP
)] to input and set the name.
• The cursor disappears.
iRepeat steps e to y to program another voice
memory’s name, if desired.
oPush [Z(
MENU / GRP
)] twice to exit the voice mem-
ory screen.
[MENU/GRP] [F-2] [F-3] [F-4]
[F-1]
■ Programming a memory name for transmit
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from: M, S or G(Graphic)
Menu selection (Example: S)
Push [MENU/GRP] momentarily.
Selection from: S - 1 , S - 2 or S - 3
Either
Y or Z
Either
Y or Z