Icom IC-7000 - Manual (Page 134)

125
13
SET MODE
■ Quick set mode (continued)
Twin Peak Filter (RTTY mode)
This item turns the twin peak filter ON and OFF. ON
Twin peak filter is ON
OFF
Twin peak filter is OFF. (de-
fault)
RTTY Mark Frequency (RTTY mode)
This item selects the RTTY mark frequency. RTTY
mark frequency is switched between 1275, 1615 and
2125 Hz. 2125
2125 Hz RTTY mark
frequency (default)
1275
1275 Hz RTTY mark
frequency
RTTY Shift Width (RTTY mode)
This item adjusts the RTTY shift width. There are 3
selectable values: 170, 200 and 425 Hz. 170
170 Hz RTTY shift
frequency (default)
425
425 Hz RTTY shift
frequency
RTTY Keying Polarity (RTTY mode)
This item selects the RTTY keying polarity. Normal or
reverse keying polarity can be selected.
When reverse polarity is selected, Mark and Space
are reversed.
- Normal
: Key open/close = Mark/Space
- Reverse : Key open/close = Space/Mark
Normal
Normal polarity (default)
Reverse
Reverse polarity
Side Tone Level Limit (CW mode)
This item allows you to set a maximum volume level
for CW side tones. CW side tones are linked to the
[AF] control until a specified volume level is reached
— further rotation of the
[AF] control will not increase
the volume of the CW side tones.
ON
CW side tone level is limited
with
[AF] (default)
OFF
CW side tone level is linked
to
[AF]
Side Tone Level (CW mode)
This item adjusts the CW side tone level from 0% to
100% in 1% steps.
See p. 43 for details.
5 0 %
50% (default)