Icom IC-7000 - Manual (Page 64)

55
4
RECEIVE AND TRANSMIT
DRTTY decode set mode
This set mode is used to set the decode USOS func-
tion, etc. q P ush [MODE] momentarily to select RTTY mode.
• After RTTY mode is selected, push [MODE] for 1 sec.
to toggle between RTTY and RTTY-R modes.
wSelect S - 1.
ePush [F-2 DEC] momentarily to turn the RTTY de-
coder ON.
• RTTY decoder screen appears.
rPush [F-4 SET] to select the RTTY decode set
mode.
tPush [F-1 ≤] or [F-2 ≥] to select the desired set
item.
ySet the desired condition using [DIAL].
• Push [F-4 DEF] for 1 sec. to select a default condition
or value.
uPush [Z(
MENU / GRP
)] to exit from set mode.
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group S.
• Push [MENU/GRP] momentarily one or more times to
select the menu S - 1.
[MENU/GRP] [F-1] [F-2] [F-4] [DIAL]
1 RTTY Decode USOS
This item selects the USOS (UnShift On Space) func-
tion of the internal RTTY decoder. ON
Decode as letter code
(default)
OFF
Decode as character code
2 RTTY Decode New Line Code
This item selects the new line code of the internal
RTTY decoder.
CR : Carriage Return
LF : Line Feed
CR,LF,CR+LF
CR, LF and CR+LF
(default)
CR+LF
CR+LF only