Icom IC-7000 - Manual (Page 86)

DIF filter selection
77
5
FUNCTIONS FOR RECEIVE
■ IF filter selection
The transceiver has 3 passband width IF filters for
each mode.
For SSB and CW modes, the passband width can be
set from 50 to 3600 Hz in 50 or 100 Hz steps. A total of
41 passband widths are available.
For RTTY mode, the passband width can be set from
50 to 2700 Hz in 50 or 100 Hz steps. A total of 32
passband widths are available.
For AM mode, the passband width can be set from 200
Hz to 10 kHz in 200 Hz steps. A total of 50 passband
widths are available.
For FM mode, the passband width is fixed and 3 pass-
band widths are available.
For WFM mode, the passband width is fixed at 280
kHz.
The filter selection is automatically memorized in
each mode.
The PBT shift frequencies are automatically memo-
rized in each filter.
qSelect the desired mode.
wSelect M - 1.
ePush [F-3 FIL] momentarily several times to se-
lect the IF filter 1, 2 or 3.
• The selected filter number is displayed in the LCD.
• The filter setting window appears and shows the se-
lected passband width and shift frequency. (The filter
setting window can be turned OFF in the display set
mode. (p. 127)
The IF filter for WFM mode is fixed and cannot be
changed.
SPCH /LOCK TUNER /CALL XFC
V/M
F-1 F-2
FIL
MODE
GENE
MW
1 2 3
4 5 6
7 8 9
.
0 CE
F-INP
ENT
1.8 3.5 7
10 14 18
21 24 28
50 144 430
HM-151
FIL
Passband
width
Selected IF filter
Shift
frequency
Popup indicator appears
• Push and hold [MENU/GRP] for 1 sec. once or twice
to select the menu group M.
• Push [MENU/GRP] momentarily one or more times to
select the menu M - 1.
[MENU/GRP] [F-3]