Icom IC-7000 - Manual (Page 132)

■Quick set mode
RF Power (all modes)
This item adjusts the RF output power. The RF out-
put power can be adjusted from 0 to 100% in 1 %
steps.
1 0 0 %
100% (default)
MIC Gain (SSB/AM/FM modes)
This item adjusts microphone gain from 0 to 100% in
1% steps. 5 0 %
50% (default)
123
13
SET MODE
Mode Set mode item Default setting
1 RF Power 100%
2 MIC Gain 50%
3 SSB TBW (WIDE) L 100 [Hz]
SSB 4 SSB TBW (WIDE) H 2900 [Hz]
5 SSB TBW (MID) L 300 [Hz]
6 SSB TBW (MID) H 2700 [Hz]
7 SSB TBW (NAR) L 500 [Hz]
8 SSB TBW (NAR) H 2500 [Hz]
1 RF Power 100%
2 Key Speed 20WPM
CW 3 CW Pitch 600 [Hz]
4 Side Tone Level 50%
5 Side Tone Level Limit ON
1 RF Power 100%
2 Twin Peak Filter OFF
RTTY 3 RTTY Mark Frequency 2125 [Hz]
4 RTTY Shift Width 170 [Hz]
5 RTTY Keying Polarity Normal
AM 1 RF Power 100%
FM/WFM 2 MIC Gain 50%
SSB TBW (WIDE) L (SSB mode)
These items set the transmission passband width for
wide setting by selecting the lower and higher fre-
quencies.
Lower freq. : 100 (default), 200, 300 and 500 Hz 1 0 0
100 Hz (default)