Icom IC-7000 - Manual (Page 42)

33
3
BASIC OPERATION
■Volume setting
Rotate [AF] control clockwise to increase; counter-
clockwise to decrease the audio output level.
• Set a suitable audio level.
[AF]
Audio outut
decreases
Audio output
increases
DBand edge warning beep
When selecting a frequency that lies outside of a
band’s specified frequency range, a warning beep
sounds.
This function can be turned OFF in set mode, if de-
sired.
qEnter t he miscellaneous (others) set mode as
above.
wPush [F-1 ≤] or [F-2 ≥] to select “Beep (Band
Edge),” then rotate [DIAL] to select the desired
setting.
• Push [F-4 DEF] for 1 sec. to return to default setting.
ePush [Z(
MENU / GRP
)] twice to return the normal op-
erating mode.
D Auto tuning step function
When rotating the tuning dial rapidly, the tuning speed
accelerates automatically as selected.
q Push [ AF(
SET
)] momentarily to enter the set mode
menu.
wPush [F-4 OTH] to enter the miscellaneous (oth-
ers) set mode.
ePush [F-1 ≤] or [F-2 ≥] to select “MAIN DIAL
Auto TS.”
rRotate [DIAL] to select the desired
tuning speed
from high, low and OFF.
• HIGH: Approx. 5 times faster
• LOW : Approx. twice faster
• OFF : Auto tuning step is turned OFF
• Push [F-4 DEF] for 1 sec. to return to default setting.
tPush [Z(
MENU / GRP
)] twice to return to the normal
operating mode.
[DIAL] [MENU/GRP]
[AF]
[F-1] [F-2] [F-4]