Icom IC-7000 - Manual (Page 78)

69
4
RECEIVE AND TRANSMIT
■ TV channel operation
qPush and hold [AF(
SET
)] for 1 sec. to turn the TV
mode ON.
• Push and hold [AF(
SET
)] for 1 sec again to exit the TV
mode.
wRotate [M-ch] (inner) control to select the desired
TV channel.
• [ Y(
BAND )]/[ Z(
BAND )] keys also select the TV channel.
• The popup indicator appears and shows the selected
channel number. (The popup indicator can be turned
OFF in the display set mode. p.128)
ePush [P.AMP/ATT] momentarily to turn the preamp
ON and OFF; push and hold for 1 sec. to turn the
12 dB attenuator ON.
• The popup indicator, “ ” or “ ,” appears
when the preamp is ON or attenuator is ON, respec-
tively. (The popup inidicator can be turned OFF in the
display set mo
de. p. 128)
• Each channel can store the preamp or attenuator
ON/OFF conditions independently.
• Only one of these functions can be activated at a time.
rRotate [AF] to set a suitable audio level.
WARNING! NEVER
watch a TV program while
driving a vehicle. Safe driving requires your full at-
tention–anything less may result in an accident.
[ Y]
[ Z]
[P.AMP/ATT] [AF]
[M-ch]
D Convenient functions for receive
• Preamp and attenuator (p. 74)
➥ Push [P.AMP/ATT] momentarily to turn the pre-
amp ON or OFF.
• “ ” appears when the preamp is set to ON.
➥ Push [P.AMP/ATT] for 1 sec. to set the attenua-
tor ON.
• Push [P.AMP/ATT] momentarily to turn the attenuator
OFF.
• “ ” appears when the attenuator is set to ON.