Icom IC-7000 - Manual (Page 156)

147
17
CONTROL COMMAND
• Command table (continued)
1A 050087 Send/read FM mode selectability
(0=OFF: inhibition, 1=ON: selec-
table)
050088 Send/read WFM mode selectabil-
ity (0=OFF: inhibition, 1=ON: se-
lectable)
050089 Send/read external keypad set
for voice memory (0=OFF, 1=ON)
050090 Send/read external keypad set
for keyer memory (0=OFF, 1=ON)
050091 Send/read external keypad type
connected to [MIC] connector of
controller (0=Dot/Dash type,
1=Ext Keypad)
050092 Send/read CI-V transceive set
(0=OFF, 1=ON)
050093 Send/read reference frequency
set (0=0 to 255=100%)
050094 Send/read speech compresser
level (0=0 to 10=10)
050095 Send/read auto voice monitor set
(0=OFF, 1=ON)
050096 Send/read MIC memo function
(0=OFF, 1=ON)
050097 Send/read contest number style
(0=Normal, 1=190
AANO,
2=190 AANT, 3=90ANO,
4=90 ANT)
050098 Send/read count up trigger chan-
nel (1=M1, 2=M2, 3=M3, 4=M4)
050099 Send/read present number
(1–9999)
050100 Send/read CW keyer repeat time
(1=1 sec. to 60=60 sec.)
050101 Send/read CW keyer dot/dash
ratio (28=1:1:2.8 to 45=1:1:4.5)
050102 Send/read rise time (0=2 msec.,
1=4 msec., 2=6 msec.,
3=8 msec.)
050103 Send/read CW paddle polarity
(0=Normal, 1=Reverse)
050104 Send/read CW keyer type
(0=Straight, 1=Bug-key, 2=ELEC-
Key)
050105 Send/read MIC up/down keyer
(HM-103) set (0=OFF, 1=ON)
050106 Send/read RTTY decode USOS
(0=OFF, 1=ON)
050107 Send/read RTTY decode new line
code (0=CR,LF,CR+LF, 1=CR+LF)
050108 Send/read scope max. hold
(0=OFF, 1=ON)
050109 Send/read scope size set (0=Nor-
mal, 1=Wide)
050110 Send/read fast sweep set
(0=1 sweep, 1=Continuous)
050111 Send/read fast sweep audio level
(0=0 dB, 1=–10 dB, 2=OFF)
050112 Send/read NB level set
(0=min. to 255=max.)
050113 Send/read NB width set
(0=min. to 255=max.)
1A 050063 Send/read [TUNER/CALL] key ac-
tion
set (0=Manual, 1=Auto)
050064 Send/read [ACC] (pin 7) output
“VSEND” set (0=OFF, 1=UHF
only, 2=ON)
050065 Send/read speech level (0=0 to
255=100%)
050066 Send/read speech language
(0=English, 1=Japanese)
050067 Send/read speech speed (0=Slow,
1=Fast)
050068 Send/read S-level speech
(0=OFF, 1=ON)
050069 Send/read speech capability with
[MODE] key operation
(0=OFF, 1=ON)
050070 Send/read memopad numbers
(0=5 ch, 1=10 ch)
050071 Send/read scan speed
(0=Low, 1=High)
050072 Send/read scan resume
(0=OFF, 1=ON)
050073 Send/read main dial auto TS
(0=OFF, 1=Low, 2=High)
050074 Send/read [F-1] key assigment of
the HM-151. (0=“P.AMP/ATT,”
1=“NB,” 2=“NR,” 3=“MNF,”
4=“ANF,” 5=“TS,” 6=“SPL,”
7=“A/B,” 8=“MCL,” 9=“BNK,”
10=“COM,” 11=“AGC,” 12=“TBW,”
13=“DUP,” 14=“TON,” 15=“MET,”
16=“VSC,” 17=“MPW,” 18=“MPR,”
19=“<SCOPE>,” 20=“<METER>”)
050075 Send/read [F-2] key assigment of
the HM-151. (Selectable functions
are same as [F-1].)
050076 Send/read mic. up/down speed
(0=Low, 1=High)
050077 Send/read quick RIT/ ∂TX clear
function (0=OFF, 1=ON)
050078 Send/read SSB/CW synchronous
tuning function (0=OFF, 1=ON)
050079 Send/read CW normal side set
(0=LSB, 1=USB)
050080 Send/read voice recorder 1st
menu set (0=Voice-root, 1=Voice-
RX/TX)
050081 Send/read keyer 1st menu set
(0=Keyer-root, 1=Keyer-send)
050082 Send/read DTMF 1st menu set
(0=DTMF-root, 1=DTMF-send)
050083 Send/read SSB mode selectability
(0=OFF: inhibition, 1=ON: selec-
table)
050084 Send/read CW mode selectability
(0=OFF: inhibition, 1=ON: selec-
table)
050085 Send/read RTTY mode selectabil-
ity. (0=OFF: inhibition, 1=ON: se-
lectable)
050086 Send/read AM mode selectability
(0=OFF: inhibition, 1=ON: selec-
table)
Command Sub command Description Command Sub command Description