Icom IC-7000 - Manual (Page 55)

46
4
RECEIVE AND TRANSMIT
4
Pre-set characters can be sent using the memory
keyer send menu. Contents of the memory keyer are
set using the edit menu.
• Transmitting
qSelect CW mode with [MODE].
wSet the break-in function ON (p. 87).
• When step t is performed with the break-in function
OFF, the memory keyer contents are monitored.
eSelect S - 1.
rPush [F-2 KEY] to enter
the keyer send menu.
• If the keyer root menu appears, p ush [F-1 SND] . The
keyer starting menu can be changed in the miscella-
neous (others) set mode (p. 136).
tPush [F-1 M1] — [F-4 M4] momentarily to transmit
the contents one time; push these keys for 1 sec.
to transmit the contents repeatedly.
• “M1”– “M4” are highlighted while transmitting.
• “(” and “)” appear while transmitting repeatedly.
• While transmitting repeatedly, push any function key to
cancel the transmission.
• Set the repeat interval of the memory keyer to 1–60
sec. (1 sec. steps). See p. 49 for keyer set mode.
• To decrement the contact number, push
[ Y(
MENU / GRP
)].
yPush [Z(
MENU / GRP
)] twice to exit the memory
keyer send menu and return to normal CW mode
indication.
• Memory keyer send menu
Memory keyer
content
Contact number
[MODE]
[MENU/GRP]
[F-1]
[F-2] [F-3] [F-4]
DMemory keyer send menu
Menu group selection
Push [MENU/GRP] for 1 sec.
Selection from: M, S or G(Graphic)
Menu selection (Example: S)
Push [MENU/GRP] momentarily.
Selection from: S - 1 , S - 2 or S - 3
Either
Y or Z
Either
Y or Z