Icom IC-7000 - Manual (Page 130)

DAuto power OFF activity
121
12
CLOCK AND TIMERS
DClock2 function activity
DClock2 offset setting
qEntering time set mode, push [F-1 ≤] or [F-2 ≥] to
select “CLOCK2 Function” item.
wSelect the CLOCK2 function activity using [DIAL].
ePush [Z(
MENU / GRP
)] twice to exit time set mode.
qEntering time set mode, push [F-1 ≤] or [F-2 ≥] to
select “CLOCK2 Offset” item.
wRotate [DIAL] to set the offset time within –24:00
to +24:00 in 5min. steps.
ePush [Z(
MENU / GRP
)] twice to exit time set mode.
The transceiver can be set to automatically turn OFF
after a specified period is with beep when no opera-
tion is performed. The power-off period can be set to
30–120 min. in 30 min. steps.
qEntering time set mode, push [F-2 ≥] to select
“Auto Power OFF” item.
wSet the desired power-off time using [DIAL].
• “Push [SET]” blinks.
ePush [F-3 SET] to enter the set time.
• Push [ Z(
MENU / GRP )] to cancel the setting.
rPush [Z(
MENU / GRP
)] twice to exit timer set mode.