Icom IC-7000 - Manual (Page 117)

108
8
MEMORY OPERATION
8
qSelect the menu M - 2.
wPush [F-4 V/M] to select memory mode.
ePush [F-1] (MEM, LST) twice to enter the memory
channel list.
rPush [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
tRotate [M-ch] to s
elect the memory channel to be
cleared (blanked).
yPush [F-3 MCL] for 1 sec. to clear the contents.
uPush [Z(
MENU / GRP
)] twice to exit the memory
channel list.
MCL
Push for
1 sec.
Programmed frequency
and operating mode
disappear.
[MENU/GRP]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[F-1] [F-3] [F-4]
D Memory clearing using the memory channel list
Any unnecessary memory channels can be cleared.
The cleared memory channels become blank chan-
nels.
qSelect the menu M - 2.
wPush [F-4 V/M] momentarily to select the memory
mode.
ePush [PBT/M-ch/RIT] momentarily to select the M-
ch/RIT function, if the twin PBT is selected.
• [PBT/M-ch/RIT] indicator (Green) goes out.
rRotate [M-ch] to select the memory channel to be
cleared.
tPush [F-3 MCL] for 1 sec. to clear the contents.
• The programmed frequency and operating mode dis-
appear and
“ ” appears.
yTo return to VFO mode, push [F-4 V/M] again.
Push for
1 sec.
MCL
[MENU/GRP] [F-3]
[PBT/M-ch/RIT] indicator
[PBT/M-ch/RIT] switch/[M-ch] (inner) control
[F-4]
■Memory clearing