Icom IC-7000 - Manual (Page 22)

13
1
PANEL DESCRIPTION
qFREQUENCY READOUT
Shows the operating frequency.
wMETER READOUTS
➥Shows received signal strength while receiving.
➥Shows either transmit power meter (Po), SWR,
ALC or compression level meter (COM) while
transmitting.
eMULTI-FUNCTION KEY GUIDE
Indicates the function of the multi-function keys.
These alphanumeric readouts show a variety of in-
formation
such as current functions of the “F” keys
[F-1] to [F-4].
rSPLIT FREQUENCY READOUT
Shows the transmit frequency during split operation.
tBLANK MEMORY INDICATOR
Appears when the displayed memory channel is not
programmed (blank channel).
• This indicator appears both in VFO and memory modes.
yMEMORY CHANNEL READOUT
Shows the selected memory channel or scan edge
channel.
• Memory bank indicator (A to E) appears to the left of
memory channel.
• This indicator appears both in VFO and memory modes.
uVFO/MEMORY INDICATORS
➥VFO A or B appears when VFO mode is selected;
MEMO appears when memory mode is selected.
iVOICE RECODER INDICATORS
REC appears when the digital voice recoder func-
tion is activated.
oLOCK INDICATOR
Appears when the dial lock function is activated.
!0DIRECT FREQUENCY ENTRY INDICATOR (p. 29)
Appears when the transceiver is ready for direct fre-
quency entry.
• This indicator appears when [(F-INP)ENT] key on the
HM-151 is pushed.
!0 !2 !1 @4 @2
!5a o
t
u
y !9
@0
!5b
!8
!3 !4 @3
r
i @1
e
w
q
!6
!7
■Function display
ACC 1 ACC 2
q FSKK t AF
w GND y SQLS
e HSEND u 13.8 V
r MOD
i ALC
q 8 V t ALC
w GND y VSEND
e HSEND u 13.8 V
r BAND
1 2 3 4
8
8
7 6 5
9 10 11 12
13
1
2
3
4
7 6
5
1
2
3
4
7 6
5
Connect to ACC socket
• When connecting the ACC conversion cable (OPC-599)