Icom IC-7000 - Manual (Page 91)

82
5
FUNCTIONS FOR RECEIVE
5
DAuto notch function
■ Notch function
This transceiver has auto and manual notch func-
tions. The auto notch function automatically attenu-
ates up to 3 beat tones, tuning signals, etc., even if
they are moving. The manual notch can be set to at-
tenuate a frequency via the manual notch filter set
mode.
➥While in SSB and AM modes, push [ANF/•REC] or
[MNF/ADJ] to toggle the notch function between
auto, manual and OFF.
• Both of the auto and manual notch functions can be ac-
tivate at the same time.
➥While in CW and RTTY modes, push [MNF/ADJ]
to toggle the manual notch function ON and OFF.
➥While in FM and WFM modes, push [ANF/•REC]
to toggle the auto notch function ON and OFF.
• “ ” appears when auto notch function is in use.
• “ ” appears when manual notch function is in use.
• Manual notch filter settings are described on the next
page.
The auto notch can be used in SSB, AM, FM and
WFM modes.
➥Push [ANF/• REC] momentarily to turn the auto-
matic notch function ON and OFF.
• “ ” appears when auto notch function is in use.
[ANF/ •REC]
Appears
Unwanted frequency
is attenuated
Desired
signal (AF) Desired
signal (AF)
Particular frequency
is attenuated
Auto notch OFF Auto notch ON