Icom IC-7000 - Manual (Page 159)

18
150
SPECIFICATIONS
■General
• Frequency coverage :
Receive
30 kHz – 199.999999 MHz* 1 * 2
400– 470.000000 MHz* 1 * 2
Transmit
1.800 –1.999999 MHz* 2 , 3.500 – 3.999999 MHz* 2
5.33050* 3 , 5.34650* 3 , 5.36650* 3 ,
5.37150* 3 , 5.40350* 3 ,
7.000 –7.300 MHz* 2 , 10.100 –10.150 MHz* 2 ,
14.000 –14.350 MHz* 2 , 18.068 –18.168 MHz* 2 ,
21.000 – 21.450 MHz* 2 , 24.890 – 24.990 MHz* 2 ,
28.000 – 29.700 MHz* 2 , 50.000 –54.000 MHz* 2 ,
144.000 –148.000 MHz* 2 , 430.000 –450.000 MHz* 2
* 1 Some frequency bands are not guaranteed.
* 2 Depending on version. * 3 USA version only.
• Mode : SSB, CW, RTTY, AM, FM, WFM
(WFM is for receive only)
• Number of memory CH: 503 (split memory: 99
×
5 banks; scan
edges: 6; call channel: 2 ) channels
• Antenna connector : SO-239
×
2 (for HF/50 MHz and
144/430 MHz) /50 Ÿ
• Usable temperature : –10°C to +60°C (+14°F to +140°F)
range
• Frequency stability : Less than ± 0.5 ppm
(0°C to + 50°C; + 32°F to +122°F)
• Power supply : 13.8 V DC±15% (negative ground)
requirement
• Current drain : Transmit (at 100 W) 22 A
(at 13.8 V DC) Receive squelched 1.3 A
max. audio 1.6 A
• Dimensions : 167(W)
×
58(H)
×
180(D) mm,
(projections not included) 6 9 ⁄ 16 (W)
×
2 9 ⁄ 32 (H)
×
7 3 ⁄ 32 (D) in
• Weight (approx.) : 2.3 kg (5 lb 1 oz)
• CI-V connector : 2-conductor 3.5 (d) mm ( 1 ⁄ 8 ˝)
• Video connector : 2-conductor 3.5 (d) mm ( 1 ⁄ 8 ˝)
• ACC connector : 13-pin
• Data connector : 6-pin
■Transmitter
• Output power :
SSB, CW, FM, RTTY 2–100 W (1.8–50 MHz bands)
2–50 W (144 MHz band)
2–35 W (430 MHz band)
AM 1–40 W (1.8–50 MHz bands)
2–20 W (144 MHz band)
2–14 W (430 MHz band)
• Modulation system :
SSB Balanced modulation
AM Low level modulation
FM Variable reactance modulation
• Spurious emissions : Less than – 60 dB*
*spurious freq.: below 30 MHz: –50 dB; above 50 MHz: –60 dB
• Carrier suppression : More than 50 dB
• Unwanted sideband : More than 50 dB
• Microphone
: 8-pin modular jack (600 Ÿ)
connector
• KEY connector : 3-conductor 6.35 (d) mm ( 1 ⁄ 4 ˝ )
• RTTY connector : 3-conductor 3.5 (d) mm ( 1 ⁄
8
˝)
■Receiver
• Receive system :
SSB/CW/RTTY/AM/FM Triple-conversion superheterodyne
WFM Double-conversion superheterodyne
• Intermediate frequencies:
1st
SSB/CW/RTTY/AM/FM 124.487 MHz
WFM 134.732 MHz
TV (Video) 69.0100 MHz
2nd
SSB/CW/RTTY/AM/FM 455 kHz
WFM 10.700 MHz
3rd
SSB/CW/RTTY/AM/FM 16.15 kHz
• Sensitivity ( at preamp ON) :
• Squelch sensitivity (threshold; preamp ON) :
SSB/CW/RTTY/AM Less than 5.6 µV
FM Less than 0.3 µV
• Selectivity :
SSB* (BW=2.4 kHz) More than 2.4 kHz/–6 dB
Less than 3.6 kHz/–60 dB
CW* (BW=500 Hz) More than 500 Hz/–6 dB
Less than 900 Hz/–60 dB
RTTY (BW=350 Hz ) More than 360 Hz/–6 dB
Less than 650 Hz/–60 dB
AM (BW=6 kHz) More than 6.0 kHz/–6 dB
Less than 15.0 kHz/–60 dB
FM (BW=15 kHz) More than 12.0 kHz/–6 dB
Less than 20.0 kHz/–60 dB
*IF filter shape is set to SHARP.
• Spurious and image rejection ratio:
HF bands More than 70 dB
50 MHz band More than 70 dB (except IF/2 through)
144/430 MHz band More than 65 dB (except IF through)
• Audio output power : More than 2.0 W at 10% distortion
with an 8 Ÿ load (at 13.8 V DC)
• RIT variable range : ±9.99 kHz
• PHONES connector : 3-conductor 3.5 (d) mm ( 1 ⁄ 8 ˝)/8 Ÿ
• EXT SP connector : 2-conductor 3.5 (d) mm ( 1 ⁄ 8 ˝)/8 Ÿ
17
18
Frequency
range
[MHz]
SSB/CW/
RTTY
10 dB S/N
AM
10 dB S/N
FM
12 dB SINAD
WFM
12 dB SINAD
0.5–1.8 — 13 µV — —
1.8–28
0.15 µV 2.0 µV
— —
28–29.995 0.5 µV —
50 MHz band 0.12 µV 1.0 µV 0.25 µV —
76–108 — — — 10.0 µV
144/430 MHz
bands
0.11 µV 1.0 µV 0.18 µV —