Icom IC-7000 - Manual (Page 142)

133
13
SET MODE
20 VSEND Select
This item select the [ACC] (pin 7) output.
“ON” : VSEND is for the 144/430 MHz; HSEND
is for the HF/50 MHz.
“UHF Only”: VSEND is for the 430 MHz; HSEND is
for the HF/50/144 MHz.
“OFF” : VSEND is not used; HSEND is for all
bands.
ON
VSEND is for 144/430 MHz.
(default)
■ Miscellaneous (others) set mode (continued)
19 [TUNER] Switch
You can set [TUNER/CALL] key’s action from “Auto”
and “Manual.”
Auto Optional antenna tuner is activated auto-
matically when tuner is ON. (default)
Manual Optional antenna tuner is activated,
when
[TUNER/CALL] is pushed.
18 Tuner (PTT Start)
When an optional AH-4 ANTENNA TUNER is connected,
tuning can be started automatically at the moment the
PTT is pushed.
This function activates for HF band only.
ON
Tuning starts when pushing
[PTT] on a new frequency.
OFF
Tuning starts only when
[TUNER] is pushed. (default)
22 SPEECH Language
This item selects language for the speech function.
You can select between English and Japanese as the
SPEECH language.
English
English announcement
(default)
Japanese
Japanese announcement
23 SPEECH Speed
This item selects the speech speed between faster or
slower synthesizer output. HIGH
Faster announcement
(default)
LOW
Slower announcement
21 SPEECH Level
This item adjusts the volume level for speech function
from 0% to 100% in 1% steps. 5 0 %
50% (default)