Juniper Networks EX8208 - Manual (Page 109)

Table 34: Optical Interface Support and Copper Interface Support for SFP Transceivers in
48-port SFP Line Cards Used in EX8200 Switches (continued)
Specifications Ethernet Standard
EX-SFP-1FE-LH Model Number 100Base-LH (or
100Base-ZX)
100 Mbps Rate
LC Connector Type
Dual Fiber Count
1310 nm Transmitter Wavelength
–5 dBm Minimum Launch Power
0 dBm Maximum Launch Power
–32 dBm Minimum Receiver Sensitivity
–8 dBm Maximum Input Power
SMF Fiber Type
9/125 µm Core/Cladding Size
– Modal Bandwidth
80 km (49.7 miles) Distance
Not available DOM Support
Junos OS for EX Series switches, Release 10.2 or later Software required
Related Topics 8-port SFP+ Line Card in an EX8200 Switch on page 30 •
• 40-port SFP+ Line Card in an EX8200 Switch on page 31
• 48-port SFP Line Card in an EX8200 Switch on page 33
• 48-port RJ-45 Line Card in an EX8200 Switch on page 34
• Installing a Transceiver in an EX Series Switch on page 163
• Removing a Transceiver from an EX Series Switch on page 222
SFP+ Direct Attach Cables for EX Series Switches
Small form-factor pluggable plus transceiver (SFP+) direct attach copper cables, also
known as Twinax cables, are suitable for in-rack connections between servers and
83 Copyright © 2010, Juniper Networks, Inc.
Chapter 3: Component Specifications