Figure 18: status leds on a 40-port sfp+ line card, Figure 19: status leds on a 48-port sfp line card – Juniper Networks EX8208 User Manual
Page 62
Figure 18: Status LEDs on a 40-port SFP+ Line Card
Ejector lever
Ejector lever
Line
card
LEDs
SFP+/SFP ports
Captive screw
g020902
Figure 19: Status LEDs on a 48-port SFP Line Card
g020542
Ejector lever
Ejector lever
Line card
LEDs
SFP ports
Captive
screw
Figure 20: Status LEDs on a 48-port RJ-45 Line Card
Table 14 on page 36 describes the status LEDs on line cards for the EX8200 switch, their
colors and state, and the status they indicate.
Table 14: Status LEDs on Line Cards for EX8200 Switches
State and Description
Color
LED
The line card is enabled/online.
Green
ON
The line card is disabled/offline.
Yellow
There is no power being supplied to the line card.
Unlit
•
On steadily—The line card is functioning normally.
•
Blinking—The line card is booting.
Green
ST
•
On steadily—There is a line card failure or alarm.
•
Blinking—The line card is in diagnostic mode.
Yellow
The line card is disabled/offline.
Unlit
Copyright © 2010, Juniper Networks, Inc.
36
Complete Hardware Guide for EX8208 Ethernet Switches