Unpacking a line card used in an ex8200 switch – Juniper Networks EX8208 User Manual

Page 185

Advertising
background image

Figure 56: Installing an SF Module in an EX8208 Switch

Related Topics

Removing an SF Module from an EX8208 Switch on page 217

•

•

Switch Fabric (SF) Module in an EX8208 Switch on page 28

•

SF Module LEDs in an EX8208 Switch on page 29

•

Field-Replaceable Units in an EX8208 Switch on page 23

Unpacking a Line Card Used in an EX8200 Switch

The line cards for EX8200 switches are rigid sheet-metal structures that house the line
card components including network ports. The line cards are shipped in a cardboard
carton, secured with foam packing material.

CAUTION: The line cards are maximally protected inside the shipping carton. Do not
unpack the line cards until you are ready to install them in the switch chassis.

Before you unpack a line card:

•

Ensure that you have taken the necessary precautions to prevent ESD damage (see
“Prevention of Electrostatic Discharge Damage on EX Series Switches” on page 292).

•

Ensure that you know how to handle and store the line card (see “Handling and Storing
Line Cards in EX8200 Switches” on page 227).

To unpack a line card (see Figure 57 on page 160):

159

Copyright © 2010, Juniper Networks, Inc.

Chapter 9: Installing Switch Components

Advertising